Nortel BayStack 820, Installation And Reference Manual

Page: 77 / 258

Configuring Remote Office Access
206901-A
4-3
3.
Select ISDN as the interface.
4.
Select the Remote Office Access configuration type and then click NEXT.
The configuration type options displayed in this dialog box depend on the
selections you made in the BayStack 820 ISDN Router Manager
customization dialog box. For details, refer to
“Customizing the BayStack
820 ISDN Router Manager Interface” on page 3-3 .
The Connection Profile Configuration, Remote Office Access by ISDN dialog
box
(Figure 4-3) opens.
Figure 4-3. Connection Profile Configuration, Remote Office Access by
ISDN Dialog Box
5.
Use the information in Table 4-1 to configure the settings and then do one
of the following:
• If you set the Call Direction to Incoming, click APPLY.
• If you set the Call Direction to Outgoing or Both, click APPLY and
TEST or click ADVANCED for more options.
You must still click APPLY and TEST even if the other end of the
connection has not been configured. When you click APPLY and TEST,
the BayStack 820 ISDN Router attempts to place a call to the remote site
and log in.