Nortel BayStack 820, Installation And Reference Manual

Page: 255 / 258

206901-A
Index-7
multimedia support, A-1
operating environment, A-2
PPP support, A-1
resetting, 8-5
resetting to factory default conditions, 8-6
security, A-1
system location, 8-9
system name, 8-9
weight, A-2
router system contact, 8-9
routing table, viewing, 9-4
S
S/T interface
caution, 2-6
CSU, 2-6
DSU, 2-6
NCTE, 2-6
NT1, 2-6
SAP, 9-16
save config command, 10-63
security commands, 10-54
server access
e-mail server, 9-6
FTP server, 9-6
public, 9-6
Web server, 9-6
Service Advertising Protocol, 9-16
Service Profile Identifier number, 6-2
set community string read command, 10-56
set console baud command, 10-64
set console timeout command, 10-64
set date command, 10-64
set dhcp command, 10-13
set filter default command, 10-22
set internet access time command, 10-65
set ip command, 10-30
set ip default route command, 10-28
set ip lan command, 10-28
set ip private command, 10-29
set ip rip command, 10-29
set ipx command, 10-40
set ipx default route command, 10-40
set ipx default route lan command, 10-40
set ipx lan command, 10-41
set ipx rip command, 10-40
set log level command, 10-15, 10-65
set port command, 10-47
set prompt command, 10-65
set system contact command, 10-66
set system feature command, 10-66
set system location command, 10-66
set system name command, 10-67
set time command, 10-67
set timezone command, 10-67
set trap manager command, 10-56
set user command, 10-18
set voice adapter command, 10-72
set voice port command, 10-73
show arp table command, 10-31
show bridging, 10-8
show bridging command, 10-8
show compression statistics command, 10-10
show config command, 10-67
show connection log command, 10-68
show dhcp command, 10-13
show dhcp table command, 10-13
show filter command, 10-23
show icmp statistics command, 10-32
show interface list command, 10-68
show internet access time command, 10-68
show ip command, 10-32
show ip routing table command, 10-33
show ip statistics command, 10-34
show ipx command, 10-41
show ipx sap table command, 10-42
show ipx statistics command, 10-44
show learning command, 10-8, 10-9
show multicast statistics command, 10-45
show pat command, 10-35