Norstar Compact ICS 6.0 Manual Download Page 201

Page: 201 / 252

Using System features /

201

P0992670 03

Compact ICS 6.0 System Coordinator Guide

Viewing the active Services from a one-line display
telephone

Press

²¡àâ

. The first active Service displays.

Press

to move through the active schedule.

Press

to exit.

Displays

You are viewing the active Services. Press

to see the other active Services. Press

EXIT

to quit.

The name of the current Restriction service
schedule is displayed. Press

to see

the other Ringing service schedules. Press

to select the desired schedule.

You are viewing the active Services. Press

to see the other active Services. Press

EXIT

to quit.

The name of the current Ringing service
schedule is displayed. Press

to see

the other Ringing service schedules. Press

to select the desired schedule.

You are viewing the active Services. Press

to see the other active Services. Press

EXIT

to quit.

The name of the current Routing service
schedule is displayed. Press

to see

the other Routing service schedules. Press

to select the desired schedule.

Press

to select this schedule,

to see the next available schedule, or

QUIT

to exit. If you select this schedule, it is in

effect until the next automatic schedule takes
effect.

You have entered the Show Services feature
code and there is no active Service.

<Sched> Restr'n

EXIT

<Sched> Restr'n
QUIT

<Sched> Ringing
EXIT

<Sched> Ringing

QUIT

<Sched> Routing

EXIT

<Sched> Routing
QUIT

<Sched> until *
QUIT

No services ON

Summary of Contents for Compact ICS 6.0





























































































































































































































































Search results

Summary of Contents for Compact ICS 6.0

Reviews:

Related manuals for Compact ICS 6.0

Brands by name

Popular brands

Norstar Compact ICS 6.0, Manual

Search results

Summary of Contents for Compact ICS 6.0

Reviews:

Related manuals for Compact ICS 6.0

Brands by name

Popular brands