Norstar Compact ICS 6.0 Manual Download Page 123

Page: 123 / 252

Communicating in the office /

123

P0992670 03

Compact ICS 6.0 System Coordinator Guide

You have tried to send a message to an invalid
internal number or to a telephone that is out of
service.

SHOW

appears only if you have outstanding

messages. Press

SHOW

to review messages you

have sent. Press

ADD

to send a new message.

Enter the internal number of the telephone to
which you want to send a message.

You have one or more messages and one or
more new Call Logs. Press

²¡âß

change the first line of the display to the current
time and date.

You have no line button free with which to reply
to a message.

There has been no number programmed for the
voice message center. Contact your voice
messaging service provider.

Your are at the beginning of your list of
messages. Press

to move through your

messages.

You are trying to send a message to a user
whose message waiting list is full.

You have tried to send a message but your
telephone list of sent messages is full. Cancel
one of the messages you have sent, if possible,
or wait until you have received a reply to one of
those messages.

For other displays, see ‘‘Common feature displays’’ on page 229.

Message denied

Message list
SHOW

ADD

EXIT

Message to:

Messages & Calls

MSG

CALLS

No button free

No number stored

Start of list

Their list full

Your list full

Summary of Contents for Compact ICS 6.0





























































































































































































































































Search results

Summary of Contents for Compact ICS 6.0

Reviews:

Related manuals for Compact ICS 6.0

Brands by name

Popular brands

Norstar Compact ICS 6.0, Manual

Search results

Summary of Contents for Compact ICS 6.0

Reviews:

Related manuals for Compact ICS 6.0

Brands by name

Popular brands