Norstar Compact ICS 6.0, Manual

Page: 55 / 252

Answering calls /
55
P0992670 03 Compact ICS 6.0 System Coordinator Guide
You can re-establish the conference.
1. Press
²Ü
.
2. Take the held call off hold. This is not necessary for the M7100 or
T7100 telephone.
Removing yourself from a conference
You can remove yourself from a conference, and connect the other two
callers through your Norstar system.
Enter the Transfer feature code
²àâ
.
When you remove yourself from a conference using the Transfer feature,
and both callers are from outside your system, one of the callers must have
called you on a disconnect supervised line, or the call is disconnected.
Displays
You are trying to add a fourth party to your
conference call, or to join two conferences
together. Release one call from the conference
before adding another, or keep the two
conferences separate.
You have put a conference call on hold.
You have tried to make a conference call, but your
system is already handling its maximum of four
conference calls.
You are on a conference with the two lines or
telephones shown. You can drop out of the
conference and leave the other two parties
connected (Unsupervised Conference) by
pressing
TRANSFER
or entering the Transfer feature
code.
You have activated the Conference feature with
one call active and another on hold. Press the line
of the call on hold to bring that person into the
conference.
For other displays, see ‘‘Common feature displays’’ on page 229.
3 parties only
Conf. on hold
Conference busy
Line001 21
TRANSFER
Press held line