Norstar Compact ICS 6.0 Manual Download

Page: 187 / 252

Telephone features /

187

P0992670 03

Compact ICS 6.0 System Coordinator Guide

Reply to a Ring
Again signal

To connect with a Ring Again request when you are on a call
(or your telephone is off-hook):

• Enter

˚¤

. This automatically places your call on

hold.

• To return to the caller on hold, enter

To connect with a ring again request when your telephone is
on-hook:

• Lift the handset. The Ring Again number is automatically

redialed.

If you do not respond to the Ring Again signal within 30
seconds, Ring Again is canceled.

Saved Number
Redial

˚•ﬂ‡

Allows you to save an external number while you are on a call
or while the called telephone is ringing. To automatically
redial the saved number:

• Enter

˚•ﬂ‡

System Speed
Dial

˚•‚

<plus the speed dial code>

Allows you to use a speed dial code to quickly dial
preprogrammed telephone numbers. See ‘‘Using Speed
Dial’’ on page 88 for more information.

You cannot program personal speed dial numbers for the
telephone connected to the I-ATA.

Timed Release

˚•‡¤

Generates a longer Link signal. Use this feature when you
want to release a call from your line but retain the use of the
line for another call.

Transfer

Allows you to transfer a call. To transfer a call you must have
an available intercom line.

• Enter

˚•‡‚

• Enter the transfer destination number.
• Replace the handset.

To Transfer using Conference

• Enter

˚¤

• Make the second call.
• Enter

˚•‹

• Replace the handset.

Trunk Answer

˚•°‚‚

Allows you to pick up a ringing external call on a line for which
Ringing Service is turned on.

Summary of Contents for Compact ICS 6.0





























































































































































































































































Search results

Summary of Contents for Compact ICS 6.0

Reviews:

Related manuals for Compact ICS 6.0

Brands by name

Popular brands

Norstar Compact ICS 6.0, Manual

Search results

Summary of Contents for Compact ICS 6.0

Reviews:

Related manuals for Compact ICS 6.0

Brands by name

Popular brands