Norstar Compact ICS 6.0, Manual

Page: 59 / 252

Answering calls /
59
P0992670 03 Compact ICS 6.0 System Coordinator Guide
Changing Handsfree for a telephone
You can program the type of Handsfree used with each telephone.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 13 for more information.
1. Press
²¥¥ÛßßÜÝÝ
.
2. Press
ÛÜßÝß
(the default System Coordinator password).
3. Press
≠
and enter the internal number of the telephone you
want to program.
4. Press
≠
twice.
5. Press
‘
three times.
6. Choose a setting at
Handsfree:
using the
CHANGE
button.
There are three ways to set Handsfree for an individual telephone:
Both Auto and standard Handsfree allow you to use a headset with a
Norstar telephone.
A Handsfree/Mute button is automatically assigned to a telephone that is
programmed with Handsfree and is always located in the lower right-hand
corner of the telephone.
Handsfree is not available to the telephone.
You can make or answer a call without having to
pick up the handset or press the button labeled
Handsfree/Mute. The internal microphone and
speaker of the telephone turn on automatically
when you press a line or intercom button to make
or answer a call.
A standard version of Handsfree described
‘‘Using Handsfree/Mute’’ on page 56.
For other displays, see ‘‘Common feature displays’’ on page 229.
Handsfree:None
CHANGE
Handsfree:Auto
CHANGE
Handsfree:Std
CHANGE