Norstar Compact ICS 6.0, Manual

Page: 67 / 252

Making calls /
67
P0992670 03 Compact ICS 6.0 System Coordinator Guide
Changing how you dial your calls
1. Press
²¥¡Û
.
2. Press
£
or
NEXT
until the dialing mode you want appears.
3. Press
³
or
OK
to select the displayed dialing mode.
The dialing modes feature code cannot be programmed onto a memory
button.
Using Standard Dial
Standard Dial allows you to make a call by selecting a line and dialing the
number. If you have a prime line, it is selected automatically when you lift
the handset or press the button labeled Handsfree/Mute.
You cannot use Standard Dial on an M7100 or T7100 telephone unless you
pick up the handset first. If you are using either of these sets, use the
Automatic Dial or Pre-dial feature for on-hook dialing.
Using Automatic Dial
Automatic Dial allows you to dial a number without selecting a line. Your
prime line is selected as soon as you start dialing a number.
Automatic Dial does not work if your telephone has no prime line or if your
prime line is in use.
Telephones connected to an analog terminal adapter (ATA) cannot use
Automatic Dial.
Using Pre-dial
Pre-dial allows you to enter a telephone number, check it, then change it
before actually making the call. The call is not dialed until you select a line
or line pool, or pick up the handset. You can pre-dial both external and
internal numbers. You must, however, select the correct type of line
(external or internal) for the type of number you have entered.