Norstar Compact ICS 6.0 Manual Download Page 209

Page: 209 / 252

Using System features /

209

P0992670 03

Compact ICS 6.0 System Coordinator Guide

Full, in addition to the restrictions outlined for Partial lock, prevents:

Changing Set Lock programming for a telephone

You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 13 for more information.

Press

²¥¥ÛßßÜÝÝ

Press

ÛÜßÝß

(the default System Coordinator password).

Press

≠

Terminals&Sets

and enter the internal number of

the telephone you want to program.

Press

≠

Press

‘

until the display shows

Restrictions

Press

≠

twice.

Use

CHANGE

to select one of the three options:

None, Partial

and

Full

Using an auxiliary ringer

An auxiliary ringer is a separate device that has to be connected to Norstar.

Turning the auxiliary ringer for a telephone on or off

You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 13 for more information.

Press

²¥¥ÛßßÜÝÝ

Press

ÛÜßÝß

(the default System Coordinator password).

Press

≠

Terminals&Sets

Enter the internal number of the telephone you want to program and
press

≠

. The display shows

Capabilities

• changing Background Music
• changing Privacy
• changing Do Not Disturb
• using Ring Again

• using Call Forward all calls
• using Send Message
• using Trunk Answer
• activating Services

Summary of Contents for Compact ICS 6.0





























































































































































































































































Search results

Summary of Contents for Compact ICS 6.0

Reviews:

Related manuals for Compact ICS 6.0

Brands by name

Popular brands

Norstar Compact ICS 6.0, Manual

Search results

Summary of Contents for Compact ICS 6.0

Reviews:

Related manuals for Compact ICS 6.0

Brands by name

Popular brands