Norstar Compact ICS 6.0, Manual

Page: 204 / 252

204
/ Using System features
Compact ICS 6.0 System Coordinator Guide P0992670 03
5. Press
‘
until you see Progrming pswds ˆ .
6. Press
≠
.
7. Press
‘
until you see the name of the password you want to
change.
8. Use
≠
,
CHANGE
and the dialpad to enter the new password.
Press
OK
to accept the new password.
You cannot erase or eliminate the ability to program passwords.
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can clear it in
programming. The individual can then enter a new password from his or
her telephone.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 13 for more information.
1. Press
²¥¥ÛßßÜÝÝ
.
2. Press
ÛÜßÝß
(the default System Coordinator password).
3. Press
‘
four times.
4. Press
≠
at
Passwords
.
5. Press
‘
until the display shows
Call log pswds
.
6. Press
≠
and enter the internal telephone number of the
telephone where you want to clear the Call Log password.
7. Press
≠
, then press CLR to clear the password.
Hospitality password
There are two passwords within the Hospitality feature. One provides
secure access to the administration set for programming the service, and
one provides secure access to a room condition setting from each room set
for housekeeping staff.