Norstar Compact ICS 6.0, Manual

Page: 144 / 252

144
/ Customizing your telephone
Compact ICS 6.0 System Coordinator Guide P0992670 03
M7310 dual memory buttons
Default button assignments
Default features are assigned automatically to the programmable buttons
on Norstar telephones and vary depending on the telephone. The default
features are listed in the tables in this chapter.
Rules of default button assignment
Line and intercom buttons are assigned by default templates and can be
changed in programming. Handsfree/Mute and Answer buttons are not
assigned by default. If these features are defined, however, they are
automatically assigned to specific buttons, as described on this and the
following page. None of these buttons can be assigned to M7100 or T7100
telephones.
The Handsfree/Mute feature appears on the bottom right-hand button. It
appears on the bottom button on the M7208 and T7208 telephones. This
feature moves the Intercom button(s) up one position.
Each telephone can have up to eight Intercom buttons. They appear above
the Handsfree/Mute button at the bottom right-hand position on your
*12 ∫Set 233
13 ∫Set 221
*20 ∫Set 237
21 ∫Set 225
*28 ∫Set 241
29 ∫Set 229
Note: This example
shows defaults for a
system with three-digit
internal numbers. The
defaults do not actually
exist on any telephone,
as no telephone has an
autodial button for itself.
The position that would
be taken by the autodial
button for itself, is
blank.
* These settings are
produced using the
shift key, located
beside the upper set of
buttons.
*14 ∫Set 234
15 ∫Set 222
*22 ∫Set 238
23 ∫Set 226
*30 ∫Set 242
31 ∫Set 230
*16
∫Set 235
17 ∫Set 223
*24
∫Set 239
25 ∫Set 227
*32
∫Set 243
33 ∫Set 231
*18 ∫Set 236
19 ∫Set 224
*26 ∫Set 240
27 ∫Set 228
*34 ∫Set 244
35 ∫Set 232
Shift key