Norstar Compact ICS 6.0, Manual

Page: 151 / 252

User Preferences /
151
P0992670 03 Compact ICS 6.0 System Coordinator Guide
Information about individual displays you may see is described at the end
of this section.
Changing a User Speed Dial
1. Press
≠
at User Speed Dial . The display shows the number
of speed dial codes that are available.
2. Press
‘
to see the first speed dial code (256).
3. Press
‘
to move through all the speed dial codes.
4. Press
≠
at the code you want to change.
5. Press
CHANGE
and enter the telephone number the same way you
would dial it on the telephone.
6. Press
OK
.
7. Press
‘
and choose the line (or enter a code for a line pool)
the speed dial code should use.
Use the line pool code to select a particular line pool for use with Speed
Dial. If you select
Use routing tbl
, a line or pool is chosen by the routing
programming according to the initial digits in the number.
The route you choose for a User Speed Dial code must be one that the
telephone can use. For example, if the telephone does not have access to
Line Pool B and you use that pool code with the speed dial code, the code
does not work.
To change a system speed dial code, see ‘‘Adding or changing a system
speed dial’’ on page 29.
FEATR
Press to store a feature code on the button.
FIND
Locates a specific button on a telephone by entering its number.
Button numbers are shown in the illustrations.
LIST
Takes you to a list of feature codes. Press
‘
to move
through the list and press
OK
when you see the feature you want to
program on the button.