Nordson Encore XL Powder, Manual

Page: 98 / 155

© 2021 Nordson Corporation
1607027-01
8-24 Repair
Final Filter Replacement
WARNING: Relieve system air pressure and lock out the air supply before performing
the following tasks. Failure to observe this warning may result in personal injury.
1. See Figure 8-19 . Remove the final filter brackets (1).
2. Pull the old final filter (2) out of the powder feed center.
3. Inspect the inside of the fan housing. Vacuum out any powder that has accumulated
inside the housing.
NOTE: If powder has accumulated inside the fan housing, check the cartridge filter
media and gaskets. Tighten the cartridge filters’ mounting hardware to compress the
gaskets or replace the cartridge filters.
4. Remove the new final filter from its carton and inspect it for damage. Do not use
damaged final filters.
5. Place the new final filter into the powder feed center.
6. Install the final filter brackets.
7. Tighten the bracket nuts to compress the final filter evenly on all four sides.
1
2
Figure 8-19 Final Filter Replacement