Nordson Encore XL Powder, Manual

Page: 24 / 155

© 2021 Nordson Corporation
1607027-01
2-12 Overview
Sieve
See Figure 2-8.
The vibratory sieve is mounted onto a bracket assembly (5).
The sieve lid (3), 20 mesh sieve screen (13), and screen gasket (12) are clamped to the
pan by two latches (11). Optional screens are available in different mesh (micron) sizes.
When the latches are released, the sieve pan can be rotated so that the discharge chute
(8) deposits the screened powder into the powder source, or when purging, so the chute
is pointing toward the exhaust duct intake.
For hard-to-screen powders, a Vibrasonic system with an ultrasonic screen is available.
Refer to
Options
for more information.
1
2
3
4
5
7
8
9
11
13
12
6
10
Figure 2-8 Sieve and Mounting Bracket Assembly (Standard Screen Shown)
1. Deck plug
2. Powder inlet stubs (4)
3. Sieve lid
4. Vibrator motor 5. Mounting bracket assembly
6. Powder purge ports
7. Vibration isolators
8. Sieve pan discharge chute
9. Sieve ring 10. Ground clip
11. Latches
12. Screen gasket
13. Sieve screen