Nordson Encore XL Powder, Manual

Page: 13 / 155

2-1 Overview
© 2021 Nordson Corporation
1607027-01
Section 2
Overview
Introduction
See Figure 2-1. The Encore
™
XL powder feed center conditions and supplies powder
for up to 36 Venturi pumps. It contains a sieve, hopper table, lance and lift assembly,
Venturi-type in-line powder pumps, level sensors, purge manifold, dust collector, fan, and
electrical and pneumatic controls.
The feed center provides quick color changes and automatic purge cleaning. Powder
is drawn from a box or fluidized hopper powder source by the lance-mounted, in-line
powder pumps. The powder is then delivered through feed hoses to the spray guns.
The feed center can be equipped with up to 36 Venturi pumps, and is furnished with a
vibratory table to aid in the fluidization of powder in boxes.
The feed center controls are designed to accommodate one to two HDLV
®
reclaim pumps
to transport over-sprayed powder from the powder recovery system to the feed center,
and an optional HDLV pump to transport virgin powder to the system as needed.
Figure 2-1 Powder Feed Center