Nordson Encore XL Powder, Manual

Page: 103 / 155

9-1 Parts
© 2021 Nordson Corporation
1607027-01
Section 9
Parts
Parts
To order parts, call the Nordson Industrial Coating Systems Customer Support Center at
(800) 433-9319 or contact your local Nordson representative.
Using the Illustrated Parts List
Numbers in the Item column correspond to numbers that identify parts in illustrations
following each parts list. The code NS (not shown) indicates that a listed part is not
illustrated. A dash (—) is used when the part number applies to all parts in the illustration.
The number in the Part column is the Nordson Corporation part number. A series of
dashes in this column (- - - - - -) means the part cannot be ordered separately.
The Description column gives the part name, as well as its dimensions and other
characteristics when appropriate. Indentions show the relationships between assemblies,
subassemblies, and parts.
• If you order the assembly, items 1 and 2 will be included.
• If you order item 1, item 2 will be included.
• If you order item 2, you will receive item 2 only.
The number in the Quantity column is the quantity required per unit, assembly, or
subassembly. The code AR (As Required) is used if the part number is a bulk item
ordered in quantities or if the quantity per assembly depends on the product version or
model.
Letters in the Note column refer to notes at the end of each parts list. Notes contain
important information about usage and ordering. Special attention should be given to
notes.
Item Part Part Part Description Quantity Note
— - - - - - - — — —
1 - - - - - -
2
Continued...
NOTE: A.
B.
NS: Not Shown
AR: As Required