1. Introduction
AUTOMATIC PETRO PYROLYSIS MERCURY ANALYZER – MERCURY/PE-1000
2
No.600-2111-09
1.2. Equipment overview
The Mercury/PE-1000 is a mercury analysis system that can easily measure the amount of
mercury contained in petroleum or natural gas (optional) in a quick, supersensitive, and
highly accurate manner.
（
A system name in case there is no sample changer is "PE-1."
）
As shown in Fig. 1 the system consists of the mercury measuring equipment (PE-1), an auto
sample changer (HT-300A), and a personal computer (hereafter referred to as the PC). Once
samples are set in the HT-300A each sample is automatically transferred to and measured
in the measuring section.
Measurement results can be analyzed using a PC through various methods such as
statistical calculations.
In order to fully utilize the capabilities of the equipment ensure you thoroughly read this
instruction manual prior to use.
Fig. 1: PE-1000 system
Auto sampler HT-300A(Option)
Mercury measuring equipment
PE-1
