Nippon Mercury/PE-1 Instruction Manual Download Page 65

Page: 65 / 108

7. PE1000Win software

AUTOMATIC PETRO PYROLYSIS MERCURY ANALYZER – MERCURY/PE-1000

No.600-2111-09

PE1000Win software

Details of the PE1000Win software are described in this chapter.

The software has two functions: PE-1 control and data analysis. It also has two BASIC

screens: the CONTROL screen and the ANALYSIS screen.

To switch screens, select click [Window] - [DisplayChange (CTL)] or, [Window] -

[DisplayChange (ANA)] or click the

icon.

7.1. BASIC screen description

The two BASIC screens and common indications are described in this section.

CONTROL screen

①

Sequence window

Animatedly displays the measurement sequence.

“READY” shows the state of the current measurement sequence.

②

On-line profile window

Displays an absorbance profile during measurement.

The value in the graph denotes the instantaneous value during measurement and the

measurement result after measurement.

The scrollbar on the left of the window is used to switch to full scale.

③

Table window

Specifies the samples to be measured. Standard samples and unknown samples are

controlled in separate tables. Measurement results are displayed here after

measurement.

Summary of Contents for Mercury/PE-1













































































































Search results

Summary of Contents for Mercury/PE-1

Reviews:

Related manuals for Mercury/PE-1

Brands by name

Popular brands

Nippon Mercury/PE-1, Instruction Manual

Search results

Summary of Contents for Mercury/PE-1

Reviews:

Related manuals for Mercury/PE-1

Brands by name

Popular brands