Nibe SMO 10, Installation And Maintenance Instructions Manual, Page: 43 / 60

Service menus 41
SMO 10
Heat pump settings
Menu 9.1.11 Time bet. starts(19)*
Minimum time interval in minutes between compres-
sor starts in FIGHTER 2010 / 2005. The value is
adjustable between 20 and 60 °C.
3 0 m i n
T i m e b e t . s t a r t s ( 1 9 )
9 . 1 . 1 1
Menu 9.1.12 Add heat relay*
No function.
1 2 0 m i n
A d d h e a t r e l a y ( 2 8 )
9 . 1 . 1 2
Menu 9.1.13 Return max.*
The max return temperature in FIGHTER 2010 / 2005
is set here. The value is adjustable between 25 and
60 °C.
5 0 ° C
R e t u r n m a x . ( 3 0 )
9 . 1 . 1 3
Menu 9.1.14 Return diff.*
Connection difference return temperature. The value
is adjustable between 0 and 10 °C.
2 ° C
R e t u r n d i f f . ( 3 1 )
9 . 1 . 1 4
Menu 9.1.17 Return
Pressing the Enter button returns you to menu 9.1.0.
R e t u r n
9 . 1 . 1 7
*
The numbers in brackets denote the corresponding
channel number in FIGHTER 2010 / 2005.
S
S
S
S
Menu 9.1.15 Comp. Stop XVV
The temperature at which, with extra hot water, the
compressor operations switch to the immersion heater
for hot water is set here. The same value as in menu
1.4 should be set here.
The value is adjustable between 45 and 65 °C.
5 0 ° C
C o m p . S t o p X V V
9 . 1 . 1 5
S
Menu 9.1.16 Max time Compr.
When the compressor does not succeed in raising the
temperature after this, SMO 10 switches to combi
mode and starts the immersion heater in the hot water
heater.
The value is adjustable between 0 and 20 minutes.
1 0 m i n
M a x t i m e C o m p r .
9 . 1 . 1 6
S
Menu 9.1.9 Balancetemp.*
No function.
5 ° C
B a l a n c e t e m p . ( 1 7 )
9 . 1 . 9
S
Menu 9.1.10 Stop Temp.*
Stop temperature, set outdoor air temperature when
the downtime relay in FIGHTER 2010 / 2005 is acti-
vated, FIGHTER 2010 / 2005 stops. The value is
adjustable between -12 and 0 °C.
- 7 ° C
S t o p T e m p . ( 1 8 )
9 . 1 . 1 0
S