Nibe SMO 10, Installation And Maintenance Instructions Manual, Page: 24 / 60

Docking
SMO 10
22
FIGHTER 2010 / 2005 is docked to the immersion heater after the shuttle
valve together with SMO 10 and water heater (floating condensing)
AV Shut-off valve
BV Non-return valve
EXP Expansion tank with requisite
safety equipment
FG1 Flow sensor 1
FG2 Flow sensor 2
HR Auxiliary relay
LP1 Charge pump 1
LP2 Charge pump 2
PG Boiler sensor
RG1 Return sensor 1
RG2 Return sensor 2
FIGHTER 2010
HR
VVC
LP1
UG
VVG
VXV1
VVC
RG1
CP1
FG1
ELK
EXP
SMO 10
AV
SÄV
AV
AV
BV
SMO 10 controls FIGHTER 2010 / 2005, immersion heater,
circulation pump, shunt, etc. FIGHTER 2010 / 2005 works
with floating condensing against the heating system and pri-
oritizes hot water charging via the shuttle valve (VXV1).
FIGHTER 2010 /2005 works in stage 1 or stage 2 depending
on the outdoor air temperature and the heating requirement.
If FIGHTER 2010 / 2005 cannot meet the heating require-
ment, additional heated is connected from the immersion
heater.
When additional heat is engaged, hot water is heated using
the immersion heater in the hot water heater.
The outline diagram is equipped with accessories.
RV Control valve
SF Particle filter Included in
FIGHTER 2010/2005
SV1 Shunt valve 1
SÄV Safety valve
TV Drain valve
UG Outside sensor
VVC Hot water circulation
VVG Hot water sensor
VXV1 Shuttle valve 1
VXV2 Shuttle valve 2
PoolG Pool sensor
Abbreviations
FIGHTER 2010/2005