NF DM2571, User Manual

Page: 287 / 369

REMOTE CONTROL
283
SENSe AVERage Commands
[SENSe:]AVERage:COUNt[X]
Sets the digital filter count, which X = 1 indicate 1
st
display, X = 2 indicate 2
nd
display.
Parameter: <NR1> (2 to 100) | MIN | MAX | DEF
Example: SENS:AVER:COUN 100
Sets 2
nd
display digital filter count number to 100.
[SENSe:]AVERage:COUNt[X]?
Returns the digital filter count.
Return parameter: <NR1>, Ex: +002
[SENSe:]AVERage:STATe[X]
Turns the digital filter function On/Off, which X = 1 indicate 1
st
display, X = 2
indicate 2
nd
display.
Parameter: 0 | 1 | ON | OFF
Example: SENS:AVER:STAT ON
Turns 1
st
display digital filter function on.
●If speed >= 7.2k/s, the filter function will be disabled.
[SENSe:]AVERage:STATe[X]?
Returns the state of the digital filter function (on or off).
Return parameter: 0 | 1, 0=OFF, 1=ON
[SENSe:]AVERage:TCONtrol[X]
Selects the digital filter type, which X = 1 indicate 1
st
display, X = 2 indicate
2
nd
display.
Parameter: MOV | REP
Example: SENS:AVER:TCON MOV
Sets 1
st
display digital filter type to the moving filter.
[SENSe:]AVERage:TCONtrol[X]?
Returns the digital filter type.
Return parameter: MOV (moving) | REP (repeating)
[SENSe:]AVERage:WINDow[X]
Selects a digital filter window, which X = 1 indicate 1
st
display, X = 2 indicate
2
nd
display.
Parameters: 0.01 | 0.1 | 1 | 10 | NONE
Example: SENS:AVER:WIND 0.1
Sets 1
st
display digital filter window to 0.1%
[SENSe:]AVERage:WINDow[X]?
Returns the digital filter window value.
Return parameter: 0.01 | 0.1 | 1 | 10 | NONE