NF DM2571, User Manual

Page: 280 / 369

DM2571 User Manual
276
DISPlay:TEXT[:DATA]
Sets the text message to TFTLCD display screen.
Parameter: ”<message>”
Example: DISP:TEXT:DATA “testing”
Prints the testing characters to TFT LCD display screen.
DISPlay:TEXT:[:DATA]?
Returns the text message of TFT LCD display screen.
Return parameter: ”<message>”, Ex: ”testing”
DISPlay:VIEW
Sets the display form of measured value.
Parameter: NUMeric | HISTogram | TCHart | METer
Example: DISP:VIEW HIST
Sets display in the histogram mode.
DISPlay:VIEW?
Returns the display form of measured value.
Return parameter: NUM | HIST | TCH | MET
MEASure Commands
MEASure[:VOLTage]:DC?
Returns the DC voltage measurement value on the 1
st
display.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX |
DEF)[,Resolution(<NRf> | MIN | MAX | DEF)]]
Example: MEAS:VOLT:DC? MIN
> +6.64925206E-04
Returns the DC voltage measurement value as 0.6649 mV.
●Autoranging (AUTO or DEFault), will generate an error if you specify a
<resolution> because the instrument cannot accurately resolve the integration
time (especially if the input continuously changes). If your application
requires autoranging, specify DEFault for the <resolution> or omit the
<resolution> altogether.
MEASure[:VOLTage][:DC]:RATio?
Returns the DC ratio measurement value on the 1
st
display.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX |
DEF)[,Resolution(<NRf> | MIN | MAX | DEF)]]
Example: MEAS:VOLT:DC:RAT?
> +2.87393920E-03
Returns the DC ratio measurement value as 2.87393 m.
●Autoranging (AUTO or DEFault), will generate an error if you specify a
<resolution> because the instrument cannot accurately resolve the integration
time (especially if the input continuously changes). If your application
requires autoranging, specify DEFault for the <resolution> or omit the
<resolution> altogether.