24
www.nextel.com
You can store up to 100 names, phone numbers and Private IDs using the
following steps:
1
Press
n
until you see the “Prgm” option.
2
Press
o
under “Prgm”. Then press
2
then
0
.
3
The message: 20=Phone / Prvt List displays.
Press
o
under “Ok”. Another message will display with the remaining
numbers of slots available. The phone will then display the Enter
Name screen.
4
Enter the name of the individual you want to store.
(Notice, each key has a number and several letters. To select different
letters on a key, quickly press the key until the desired letter displays.
For example, to enter the letter Y you must press
9
3 times quickly.
Also, you can press and hold
#
to change the case of the letter you
just entered (lower to uppercase and upper to lowercase). The default
style is uppercase.)
NOTE: Press
l
to delete a letter. Press
r
to insert a space.
After you have entered the name, press
o
under “Store”.
5
Enter Phone Number displays. Enter the area code and phone number.
Also, you may use the Plus Dialing and/or Pause Digit Entry at this
screen. Refer to “Pause Digit Entry” on page 25 and/or “Plus Dialing”
on page 32.
Press
o
under “Store”.
6
The name and Spd# = displays. The system automatically assigns a
Speed Dial number, which you can change by entering a new number.
Press
o
under “Store”.
7
Enter PrvtID displays. Enter the person’s Direct Connect Private ID.
Press
o
under “Store”. If you do not wish to store a Private ID, press
o
under “Skip”.
8
Repeat steps 3 through 7 to add additional names/numbers.
9
Press
o
under “Exit” when you have finished.
