Phone Based
25
Pause Digit Entry
When storing a number, you can program your phone so that it will not only dial
a number but also pause and enter another series of numbers such as a personal
PIN or password. This feature is particularly useful for automated services such
as voice mail and banking systems.
Example: Let’s say you have a company voice mail account that you frequently
check while traveling. And, to access that account you must do the following:
•
Dial your work number;
•
Press
#
while the voice mail greeting is being played; and
•
Enter your PIN to access your messages.
You can program your i2000plus phone to enter all of the above information for
you. All you have to do is separate each entry with a pause. If you were to
program your phone to automatically input the above information, the stored
data would look like this 17035551234P#P1234. In this example, the first
eleven digits represent the number that must be dialed to access your voice mail.
The P represents a 3 second pause. The # interrupts your greeting. The second P
represents another 3 second pause. The last four digits represent your personal
PIN.
You can use this feature not only to enter PINs and passwords but also to have
the phone automatically select menu options (i.e., press 1 to hear messages).
To create a three-second pause follow the steps below.
NOTE: You can enter up to 20 numbers/characters in a single entry,
stored or dialed.
NOTE: If you use a system that will not let you enter an option until the
automated message has played in its entirety, you can program
your phone to pause for more than 3 seconds. For example,
performing the above step twice will program two pauses and
cause your phone to wait 6 seconds before entering the next
set of numbers.
Editing Stored List Entries
Once you have created lists, you can edit them as necessary. Select the
applicable option below to edit a portion of a list.
Edit a Phone Number or Associated Name or Speed Dial Number
Press and hold
*
for two seconds. The pause symbol (P) will appear.
1
Press
n
until you see the “Prgm” option.
2
Press
o
under “Prgm”. Press
2
then
1
.
3
At the Phone List Edit screen, press
o
under “Ok”.
