Management Commands
685
ProSafe Managed Switch
delivery and a shared key configured on the client and daemon server to encrypt all
messages.
debug tacacs packet
Use the
debug tacacs packet
command to turn on packet debug.
Default
Format
debug tacacs packet [receive | transmit]
Mode
no debug tacacs packet
Use this command to turn off packet debug.
Format
no
debug tacacs packet
Mode
tacacs-server host
Use the
tacacs-server host
command in Global Configuration mode to configure a
server. This command enters into the configuration mode. The
<ip-address|hostname>
parameter is the IP address or hostname of the
server. To specify multiple hosts, multiple
tacacs-server host
commands can be used.
Format
tacacs-server host
<ip-address|hostname>
Mode
no tacacs-server host
Use the
no tacacs-server host
command to delete the specified hostname or IP
address. The
<ip-address|hostname>
parameter is the IP address of the
server.
Format
no tacacs-server host
<ip-address|hostname>
Mode
tacacs-server key
Use the
tacacs-server key
command to set the authentication and encryption key for all
communications between the switch and the daemon. The
<key-string>
parameter has a range of 0 - 128 characters and specifies the
authentication and encryption key for all TACACS communications between the switch and
the server. This key must match the key used on the daemon.
Text-based configuration supports TACACS server’s secrets in encrypted and non-encrypted
format. When you save the configuration, these secret keys are stored in encrypted format
Disabled
Global Config
Global Config
Global Config
Global Config
