Utility Commands
557
ProSafe Managed Switch
show clock
Use the show clock command in Privileged EXEC or User EXEC mode to display the time
and date from the system clock. Use the show clock detail command to show the time zone
and summertime configuration.
DHCP Server Commands
This section describes the commands you to configure the DHCP server settings for the
switch. DHCP uses UDP as its transport protocol and supports a number of features that
facilitate in administration address allocations.
ip dhcp pool
This command configures a DHCP address pool name on a DHCP server and enters DHCP
pool configuration mode.
Default
Format
ip dhcp pool <name>
Mode
no ip dhcp pool
This command removes the DHCP address pool. The name should be previously configured
pool name.
Format
no ip dhcp pool <name>
Mode
Format
show clock [detail]
Mode
User EXEC
Privileged EXEC
Term
Definition
Time
The time provided by the time source.
Time Source
The time source type.
If option
detail
is specified, these terms are displayed
Time Zone
The time zone configured.
Summer Time
Indicate if the summer time is enabled.
none
Global Config
Global Config
