Management Commands
640
ProSafe Managed Switch
username snmpv3 authentication
Use this command to specify the authentication protocol to be used for the specified user.
The valid authentication protocols are
none
,
md5
or
sha
. If you specify
md5
or
sha
, the login
password is also used as the snmpv3 authentication password and therefore must be at least
eight characters in length. The
<username>
is the user name associated with the
authentication protocol. You must enter the
<username>
in the same case you used when
you added the user. To see the case of the
<username>
, enter the
show users
command.
Default
Format
username snmpv3 authentication
<username> {none | md5 | sha}
Mode
no username snmpv3 authentication
Use this command to set the authentication protocol to be used for the specified user to
none
. The
<username>
is the user name for which the specified authentication protocol is
used.
Format
no username snmpv3 authentication
<username>
Mode
username snmpv3 encryption
Use this command to specify the encryption protocol used for the specified user. The valid
encryption protocols are
des
or
none.
If you select
des
, you can specify the required key on the command line. The encryption key
must be 8 to 64 characters long. If you select the
des
protocol but do not provide a key, the
user is prompted for the key. When you use the
des
protocol, the login password is also used
as the snmpv3 encryption password, so it must be a minimum of eight characters. If you
select
none
, you do not need to provide a key.
The
<username>
value is the login user name associated with the specified encryption. You
must enter the
<username>
in the same case you used when you added the user. To see
the case of the
<username>
, enter the
show users
command.
Default
Format
username snmpv3 encryption
<username> {none | des[key]}
Mode
no authentication
Global Config
Global Config
no encryption
Global Config
