NETGEAR ProSafe M4100-26-POE, User Manual

Page: 437 / 776

IPv6 Multicast Commands
437
ProSafe Managed Switch
------------- -------------- ---------- ----------------- -------------- -------
FF1E::1 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 2
FF1E::2 FE80::100:2.3 00:02:40 DELAY_MEMBER Include 1
FF1E::3 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 0
FF1E::4 FE80::100:2.3 00:02:44 DELAY_MEMBER Include 4
show ipv6 mld-proxy groups detail
Use this command to display information about multicast groups that MLD-Proxy reported.
Format
show ipv6 mld-proxy groups detail
Mode
• Privileged EXEC
• User EXEC
Example: The following shows example CLI display output for the command.
(Switch) #show ipv6 igmp-proxy groups
Interface Index................................ 1/0/3
Group Address Last Reporter Up Time Member State Filter Mode Sources
------------- ---------------- ----------- ----------------- ------------- -------
FF1E::1 FE80::100:2.3 244 DELAY_MEMBER Exclude 2
Group Source List Expiry Time
------------------ ---------------
2001::1 00:02:40
Field Description
Interface
The interface number of the MLD-Proxy.
Group Address
The IP address of the multicast group.
Last Reporter
The IP address of the host that last sent a membership report for the current group,
on the network attached to the MLD-Proxy interface (upstream interface).
Up Time (in secs)
The time elapsed in seconds since last created.
Member State
Possible values are:
• Idle_Member . The interface has responded to the latest group membership query
for this group.
• Delay_Member . The interface is going to send a group membership report to
respond to a group membership query for this group.
Filter Mode
Possible values are Include or Exclude.
Sources
The number of sources attached to the multicast group.
Group Source List
The list of IP addresses of the sources attached to the multicast group.
Expiry Time
The time left for a source to get deleted.