![NETGEAR ProSafe M4100-26-POE User Manual Download Page 188](http://html1.mh-extra.com/html/netgear/prosafe-m4100-26-poe/prosafe-m4100-26-poe_user-manual_1673614188.webp)
Switching Commands
188
ProSafe Managed Switch
LLDP MED Remote Device Summary
Local
Interface Remote ID Device Class
--------- --------- ------------
1/0/8
1
Class I
1/0/9
2
Not Defined
1/0/10 3
Class
II
1/0/11 4
Class
III
1/0/12
5
Network Con
show lldp med remote-device detail
Use this command to display detailed information about remote devices that transmit current
LLDP MED data to an interface on the system.
Format
show lldp med remote-device detail
<unit/slot/port>
Mode
Privileged EXEC
Term
Definition
Supported
Capabilities
Shows the supported capabilities that were received in MED TLV on this port.
Enabled
capabilities
Shows the enabled capabilities that were enabled in MED TLV on this port.
Device Class
Shows the device class as advertized by the device remotely connected to the port.
Network Policy
Information
Shows if network policy TLV is received in the LLDP frames on this port.
Media
Application
Type
Shows the application type. Types of applications are unknown, voice, voicesignaling,
guestvoice, guestvoicesignaling, sfotphonevoice, videoconferencing, streamingvideo,
videosignaling.
VLAN Id
Shows the VLAN id associated with a particular policy type.
Priority
Shows the priority associated with a particular policy type.
DSCP
Shows the DSCP associated with a particular policy type.
Unknown
Indicates if the policy type is unknown. In this case, the VLAN id, Priority and DSCP are
ignored.
Tagged
Indicates if the policy type is using tagged or untagged VLAN.
Hardware
Revision
Shows the hardware version of the remote device.
Firmware
Revision
Shows the firmware version of the remote device.
Software
Revision
Shows the software version of the remote device.