NETGEAR ProSafe M4100-26-POE, User Manual

Page: 289 / 776

Routing Commands
289
ProSafe Managed Switch
show ip ospf asbr
This command displays the internal OSPF routing table entries to Autonomous System
Boundary Routers (ASBR). This command takes no options.
Format
show ip ospf asbr
Mode
• Privileged EXEC
• User EXEC
Type
Router ID
Cost
Area ID
Next Hop
Next Hop Intf
show ip ospf database
This command displays information about the link state database when OSPF is enabled. If
you do not enter any parameters, the command displays the LSA headers for all areas. Use
the optional
<areaid>
parameter to display database information about a specific area. Use
the optional parameters to specify the type of link state advertisements to display.
Term Definition
The type of the route to the destination. It can be one of the following values:
intra — Intra-area route
inter — Inter-area route
Router ID of the destination.
Cost of using this route.
The area ID of the area from which this route is learned.
Next hop toward the destination.
The outgoing router interface to use when forwarding traffic to the next hop.
Parameter Description
asbr-summary
Use
asbr-summary
to show the autonomous system boundary router (ASBR) summary
LSAs.
external
Use
external
to display the external LSAs.
network
Use
network
to display the network LSAs.
nssa-external
Use
nssa-external
to display NSSA external LSAs.
opaque-area
Use
opaque-area
to display area opaque LSAs.
opaque-as
Use
opaque-as
to display AS opaque LSAs.
opaque-link
Use
opaque-link
to display link opaque LSAs.
router
Use
router
to display router LSAs.
summary
Use
summary
to show the LSA database summary information.