Routing Commands
266
ProSafe Managed Switch
specified. The default value for authentication type is none. Neither the default password key
nor the default key id are configured.
Default
Format
area <areaid> virtual-link <neighbor> authentication {none | {simple
<key>} | {encrypt <key> <keyid>}}
Mode
no area virtual-link authentication
This command configures the default authentication type for the OSPF virtual interface
identified by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the Router ID of
the neighbor.
Format
no area <areaid> virtual-link <neighbor> authentication
Mode
area virtual-link dead-interval (OSPF)
This command configures the dead interval for the OSPF virtual interface on the virtual
interface identified by
<areaid>
and
<neighbor>.
The
<neighbor>
parameter is the
Router ID of the neighbor. The range for seconds is 1 to 65535.
Default
Format
area <areaid> virtual-link <neighbor> dead-interval <seconds>
Mode
no area virtual-link dead-interval
This command configures the default dead interval for the OSPF virtual interface on the
virtual interface identified by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is
the Router ID of the neighbor.
Format
no area <areaid> virtual-link <neighbor> dead-interval
Mode
area virtual-link hello-interval (OSPF)
This command configures the hello interval for the OSPF virtual interface on the virtual
interface identified by
<areaid>
and
<neighbor>
. The
<neighbor>
parameter is the
Router ID of the neighbor. The range for
<seconds>
is 1 to 65535.
none
Router OSPF Config
Router OSPF Config
40
Router OSPF Config
Router OSPF Config
Default
10
