![NETGEAR ProSafe M4100-26-POE User Manual Download Page 328](http://html1.mh-extra.com/html/netgear/prosafe-m4100-26-poe/prosafe-m4100-26-poe_user-manual_1673614328.webp)
IP Multicast Commands
328
ProSafe Managed Switch
routing across the Internet, independent of the mechanisms provided by any particular
unicast routing protocol.
ip pim dense (Global Config)
This command enables the administrative mode of PIM-DM in the router.
Default
Format
ip pim dense
Mode
no ip pim dense (Global Config)
This command disables the administrative mode of PIM-DM in the router.
Format
no ip pim dense
Mode
ip pim (Interface Config)
This command sets administrative mode of PIM on an interface to enabled.
Default
Format
ip pim
Mode
no ip pim (Interface Config)
This command sets administrative mode of PIM on an interface to disabled.
Format
no ip pim
Mode
ip pim hello-interval
This command configures the transmission frequency of PIM Hello messages between PIM
enabled neighbors. This field has a range of 0 to 18000 seconds.
Default
Format
ip pim hello-interval <0-18000>
Mode
Disabled
Global Config
Global Config
disabled
Interface Config
Interface Config
30
Interface Config