Switching Commands
156
ProSafe Managed Switch
no set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period to its default value.
Format
no set igmp querier timer expiry
Mode
set igmp querier version
Use this command to set the IGMP version of the query that the snooping switch is going to
send periodically.
Default
Format
set igmp querier version
<1-2>
Mode
no set igmp querier version
Use this command to set the IGMP Querier version to its default value.
Format
no set igmp querier version
Mode
set igmp querier election participate
Use this command to enable the Snooping Querier to participate in the Querier Election
process when it discovers the presence of another Querier in the VLAN. When this mode is
enabled, if the Snooping Querier finds that the other Querier’s source address is better (less)
than the Snooping Querier’s address, it stops sending periodic queries. If the Snooping
Querier wins the election, then it will continue sending periodic queries.
Default
Format
set igmp querier election participate
Mode
no set igmp querier election participate
Use this command to set the Snooping Querier not to participate in querier election but go
into non-querier mode as soon as it discovers the presence of another querier in the same
VLAN.
Format
no set igmp querier election participate
Mode
Global Config
1
Global Config
Global Config
disabled
VLAN Config
VLAN Config
