Multicast VLAN Registration (MVR)
212
ProSafe Managed Switch
received from other interested hosts that are also connected to that port, for example,
using hub.
•
In immediate leave mode, when a leave is received, the switch is immediately
reconfigured not to forward a specific multicast stream to the port where a message is
received. This mode is used only for ports where only one client might be connected.
no mvr immediate
This command sets the MVR multicast VLAN to the default value.
mvr type
This command sets the MVR port type. When a port is set as source, it is the port to which the
multicast traffic flows using the multicast VLAN. When a port is set to receiver, it is the port where
a listening host is connected to the switch.
no mvr type
Use this command to set the MVR port type to none.
mvr vlan group
Use this command to include the port in the specific MVR group. <mVLAN> is the multicast
VLAN, and <A.B.C.D> is the IP multicast group
Format
mvr immediate
Mode
Interface Config
Default
Disabled
Format
no mvr immediate
Mode
Interface Config
Format
mvr type { receiver|source }
Mode
Interface Config
Default
none
Format
no mvr type
Mode
Interface Config
Format
mvr vlan <mVLAN> group <A.B.C.D>
Mode
Interface Config
