Switching Commands
171
ProSafe Managed Switch
show port-security
This command displays the port-security settings. If you do not use a parameter, the
command displays the settings for the entire system. Use the optional parameters to display
the settings on a specific interface or on all interfaces.
Format
show port-security
[{<unit/slot/port> | all}]
Mode
Admin Mode
For each interface, or for the interface you specify, the following information appears:
Admin Mode
Dynamic Limit
Static Limit
Violation Trap
Mode
show port-security dynamic
This command displays the dynamically locked MAC addresses for the port.
Format
show port-security dynamic
[lag <lag-intf-num> |
<unit/slot/port>
]
Mode
MAC Address
show port-security static
This command displays the statically locked MAC addresses for port.
Format
show port-security static [lag <lag-intf-num> |
<unit/slot/port>
]
Mode
MAC Address
Privileged EXEC
Term
Definition
Port Locking mode for the entire system. This field displays if you do not supply any
parameters.
Term
Definition
Port Locking mode for the Interface.
Maximum dynamically allocated MAC Addresses.
Maximum statically allocated MAC Addresses.
Whether violation traps are enabled.
Privileged EXEC
Term
Definition
MAC Address of dynamically locked MAC.
Privileged EXEC
Term
Definition
MAC Address of statically locked MAC.
