Utility Commands
576
ProSafe Managed Switch
capture file size
Use this command to configure file capture options. The command is persistent across a
reboot cycle. The range is from 2 to 512 Kbytes.
Default
Format
capture file size <file-size>
Mode
no capture file size
Use this command to reset the file size to the default (512Kbytes).
Format
no capture file size
Mode
capture line wrap
There are two methods to configure capturing CPU packets into RAM:
capture line
wrap
and
no capture line wrap
. Use the
capture line wrap
command to stop
automatically capturing packets when 128 packets are saved and have not yet been
displayed during the capturing session. When capturing is in progress, unsaved,
not-yet-displayed packets will not be lost.
Default
Format
capture line wrap
Mode
no capture line wrap
Use this command to disable the capture line wrap mode.
Format
no capture line wrap
Mode
Serviceability Packet Tracing Commands
These commands improve the capability of network engineers to diagnose conditions
affecting their managed switch product.
CAUTION:
The output of the
debug
commands can be long and may adversely affect
system performance.
512Kbytes
Global Config
Global Config
Disabled
Global Config
Global Config
