Quality of Service (QoS) Commands
471
ProSafe Managed Switch
VLAN, then the ACL rule is applied immediately. If a time range withspecified name exists
and the MAC ACL containing this ACL rule is applied to aninterface or bound to a VLAN, then
the ACL rule is applied when the time-range withspecified name becomes active. The ACL
rule is removed when the time-range withspecified name becomes inactive.
The vlan and cos parameters refer to the VLAN identifier and 802.1p user priority fields,
respectively, of the VLAN tag. For packets containing a double VLAN tag, this is the first (or
outer) tag.
The assign-queue parameter allows specification of a particular hardware queue for handling
traffic that matches this rule. The allowed
<queue-id>
value is 0-(n-1), where n is the
number of user configurable queues available for the hardware platform. The
assign-queue
parameter is valid only for a
permit
rule.
Note:
The special command form {deny | permit} any any is used to match
all Ethernet layer 2 packets, and is the equivalent of the IP access
list “match every” rule.
Ethertype Keyword
Corresponding Value
appletalk
0x809B
arp
0x0806
ibmsna
0x80D5
ipv4
0x0800
ipv6
0x86DD
ipx
0x8037
mplsmcast
0x8848
mplsucast
0x8847
netbios
0x8191
novell
0x8137, 0x8138
pppoe
0x8863, 0x8864
rarp
0x8035
Format
{deny|permit} {<srcmac> | any} {<dstmac> | any} [<ethertypekey> |
<0x0600-0xFFFF>] [vlan {eq <0-4095>}] [cos <0-7>] [[log] [time-range
<time-range-name>][assign-queue <queue-id>]] [{mirror | redirect}
<unit/slot/port>]
Mode
Mac-Access-List Config
