Switching Commands
124
ProSafe Managed Switch
specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
<vlanid>
parameter must identify a valid VLAN.
Format
no macfilter addsrc
<macaddr> <vlanid>
Mode
macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC
address of
<macaddr>
and
<vlanid>
. You must specify the
<macaddr>
parameter as a
6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
<vlanid>
parameter
must identify a valid VLAN.
Format
macfilter addsrc all
<macaddr> <vlanid>
Mode
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC
address of
<macaddr>
and VLAN of
<vlanid>
. You must specify the
<macaddr>
parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
parameter must identify a valid VLAN.
Format
no macfilter addsrc all
<macaddr> <vlanid>
Mode
show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC Filters. If you
select
<all>
, all the Static MAC Filters in the system are displayed. If you supply a value for
<macaddr>,
you must also enter a value for
<vlanid>
, and the system displays Static
MAC Filter information only for that MAC address and VLAN.
Format
show mac-address-table static
{<macaddr> <vlanid> | all}
Mode
MAC Address
VLAN ID
Source Port(s)
Interface Config
Global Config
Global Config
Privileged EXEC
Term
Definition
The MAC Address of the static MAC filter entry.
The VLAN ID of the static MAC filter entry.
The source port filter set's slot and port(s).
