Switching Commands
177
ProSafe Managed Switch
The table contains the following column headings:
Interface
Transmit Total
Receive Total
Discards
Errors
Ageouts
TLV Discards
TLV Unknowns
TLV MED
TVL802.1
TVL802.3
show lldp remote-device
Use this command to display summary information about remote devices that transmit
current LLDP data to the system. You can show information about LLDP remote data
received on all ports or on a specific port.
Format
show lldp remote-device
{<unit/slot/port> | all}
Mode
Total Drops
Total number of times the complete remote data received was not inserted due to
insufficient resources.
Total Ageouts
Total number of times a complete remote data entry was deleted because the Time to
Live interval expired.
Term
Definition
The interface in unit/slot/port format.
Total number of LLDP packets transmitted on the port.
Total number of LLDP packets received on the port.
Total number of LLDP frames discarded on the port for any reason.
The number of invalid LLDP frames received on the port.
Total number of times a complete remote data entry was deleted for the port because the
Time to Live interval expired.
The number of TLVs discarded.
Total number of LLDP TLVs received on the port where the type value is in the reserved
range, and not recognized.
Total number of LLDP MED TLVs received on the local ports.
Total number of 802.1 LLDP TLVs received on the local ports.
Total number of 802.3 LLDP TLVs received on the local ports.
Privileged EXEC
Term
Definition
Local Interface
The interface that received the LLDPDU from the remote device.
RemID
An internal identifier to the switch to mark each remote device to the system.
Chassis ID
The ID that is sent by a remote device as part of the LLDP message, it is usually a MAC
address of the device.
Term
Definition
