Using the Command-Line Interface
15
ProSafe M4100 Series Managed Switches
Table
6
explains how to enter or exit each mode.
DHCPv6 Pool
Config
Switch (Config dhcp6-pool)#
Contains the DHCPv6 server IPv6 address pool
configuration commands.
Stack Global
Config Mode
Switch (Config stack)#
Allows you to access the Stack Global Config
Mode.
ARP Access-List
Config Mode
Switch (Config-arp-access-list)#
Contains commands to add ARP ACL rules in
an ARP Access List.
Table 6. CLI Mode Access and Exit
Command Mode
Access Method
Exit or Access Previous Mode
User EXEC
This is the first level of access.
To exit, enter
logout
.
Privileged EXEC
From the User EXEC mode, enter
enable
.
To exit to the User EXEC mode, enter
exit
or
press
Ctrl-Z.
Global Config
From the Privileged EXEC mode,
enter
configure.
To exit to the Privileged EXEC mode, enter
exit
,
or press
Ctrl-Z
.
VLAN Config
From the Privileged EXEC mode,
enter
vlan database.
To exit to the Privileged EXEC mode, enter
exit
,
or press
Ctrl-Z
.
Interface Config
From the Global Config mode,
enter
interface <unit/slot/port>
or
interface loopback <id>
or
interface tunnel <id>
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-Z
.
Line Config
From the Global Config mode,
enter
lineconfig
.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-Z
.
Policy-Map
Config
From the Global Config mode,
enter
policy-map <name> in
.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-Z
.
Policy-Class-Map
Config
From the Policy Map mode enter
class
.
To exit to the Policy Map mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-Z
.
Class-Map
Config
From the Global Config mode,
enter
class-map
, and specify the
optional keyword
ipv4
to specify
the Layer 3 protocol for this class.
See
class-map
on page
466
for
more information.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-Z
.
Table 5. CLI Command Modes (Continued)
Command Mode
Prompt
Mode Description
