417
7
7.
IPv6 Multicast Commands
This chapter describes the IPv6 multicast commands available in the managed switch CLI.
Note:
Some commands described in this chapter require a license. For
more information, see
Licensing and Command Support
on page
8.
This chapter contains the following sections:
• IPv6 Multicast Forwarder Commands
on page
417
• IPv6 PIM Commands
on page
420
• IPv6 MLD Commands
on page
427
• IPv6 MLD-Proxy Commands
on page
433
The commands in this chapter are in three functional groups:
•
Show commands display switch settings, statistics, and other information.
•
Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.
•
Clear commands clear some or all of the settings to factory defaults.
Note:
There is no specific IP multicast enable for IPv6. Enabling of
multicast at global config is common for both IPv4 and IPv6.
IPv6 Multicast Forwarder Commands
Note:
There is no specific IP multicast enable for IPv6. Enabling of
multicast at global config is common for both IPv4 and IPv6.
