Routing Commands
316
ProSafe Managed Switch
no ip icmp echo-reply
Use this command to prevent the generation of ICMP Echo Reply messages by the router.
Format
no ip icmp echo-reply
Mode
ip icmp error-interval
Use this command to limit the rate at which IPv4 ICMP error messages are sent. The rate
limit is configured as a token bucket, with two configurable parameters,
burst-size
and
burst-interval
.
The
burst-interval
specifies how often the token bucket is initialized with
burst-size
tokens.
burst-interval
is from 0 to 2147483647 milliseconds (msec).
The
burst-size
is the number of ICMP error messages that can be sent during one
burst-interval
. The range is from 1 to 200 messages.
To disable ICMP rate limiting, set
burst-interval
to zero (0).
Default
•
burst-interval
of 1000 msec.
•
burst-size
of 100 messages
Format
ip icmp error-interval <
burst-interval> [<burst-size>]
Mode
no ip icmp error-interval
Use the
no
form of the command to return
burst-interval
and
burst-size
to their default values.
Format
no ip icmp error-interval
Mode
Global Config
Global Config
Global Config
