Management Commands
662
ProSafe Managed Switch
snmp-server community
Use this command to add (and name) a new SNMP community. A community
<name>
is a
name associated with the switch and with a set of SNMP managers that manage it with a
specified privileged level. The length of
<name>
can be up to 16 case-sensitive characters.
Note:
Community names in the SNMP Community Table must be unique.
When making multiple entries using the same community name, the
first entry is kept and processed and all duplicate entries are
ignored.
no snmp-server community
Use this command to remove this community name from the table. The
<name>
is the
community name to be deleted.
Format
no snmp-server community
<name>
Mode
snmp-server community ipaddr
Use this command to set a client IP address for an SNMP community. The address is the
associated community SNMP packet sending address and is used along with the client IP
mask value to denote a range of IP addresses from which SNMP clients may use that
community to access the device. A value of 0.0.0.0 allows access from any IP address.
Otherwise, this value is ANDed with the mask to determine the range of allowed client IP
addresses. The name is the applicable community name.
Default
Format
snmp-server community ipaddr
<ipaddr> <name>
Mode
Default
• Public and private, which you can rename.
• Default values for the remaining four community names are blank.
Format
snmp-server community
<name>
Mode
Global Config
Global Config
0.0.0.0
Global Config
