NETAVIS Observer 4.6 User Manual (October 2015)
Page 164 of 204
Field label
Description
Event trigger
lines/boxes
Defines whether the event triggers like tripwires and object starting/stopping fields
should be shown.
Object
markers
Defines whether object markers should be displayed. Object markers show the
object ID and information about the state of the object (MOV = moving, STP =
stopped, LOUNGE = move just a little bit), size and speed.
In this example object ID is [10], object size is 9110 pixels, and the object is moving
with a speed of 208 pixels/sec.
Event count
fields
Defines whether the event count fields are to be displayed in the lower left corner of
the view port. When enabled the count information will be displayed for each event
trigger separately in the form of
Q
for last quarter of an hour,
H
for last hour,
D
for
day and
T
for total since setup.
Here is an example:
There are two event triggers: a field for counting stopped objects and a people
counting tripwire (counter 1).
Object
bounding
boxes
Defines whether object bounding boxes should be displayed.
Here is an example of an object bounding box displayed:
Please note that also the object marker and the event triggers are displayed.
