NetApp NearStore R100, Hardware And Service Manual

Page: 87 / 164

Chapter 6: Replacing R100 Disk Shelf Devices 77
Replacing a power supply in a disk shelf
Removing a power supply from a disk shelf
Removing a power
supply To remove a power supply from a disk shelf, complete the following steps.
Step Action
1 Put on the antistatic wrist strap and grounding leash.
2 Turn off the power supply that you are replacing and disconnect the
AC power cord.
3 Loosen the thumbscrew on the lower lefthand corner of the power
supply that you want to remove while simultaneously pulling the
power supply handle towards you.