NetApp NearStore R100, Hardware And Service Manual

Page: 47 / 164

Chapter 3: Connecting an R100 System 37
4 Connect the cable provided with the Fibre Channel switch to the
following points of connection:
a. The appropriate port on the back panel of the chassis
b. An available port on the Fibre Channel switch
5 Clip and click in each end of the cable.
6 Go to “ Connecting an R100 chassis to an Ethernet network ” on
page 38.
Step Action
PS1
10/100
BASE-T
PS2
CAUTION
PROPERLY SHUT DOWN SYSTEM BEFORE OPENING CHASSIS.
OPENING WITH POWER ON WILL CAUSE IMPROPER SHUTDOWN.
MAC 00:A0:98:00:00:01
Console
Diagnostic
1 2 3 4 5 6 7 8
Base
Switch
Address
SWITCH P/S OFF PRIOR
TO REMOVAL/INSERTION
SWITCH P/S OFF PRIOR
TO REMOVAL/INSERTION