NetApp NearStore R100, Hardware And Service Manual

Page: 125 / 164

Chapter 8: Replacing External Chassis Components 115
2 Tighten and then torque the chassis fan thumbscrews 8 to 10 in.-lbs.
3 Align the pins on the bezel with the holes on the front panel of the
chassis, and then push the bezel straight onto the front panel.
4 Reconnect and turn on the power to the chassis.
5 Interrupt the boot process by pressing the Delete key during the
memory test.
6 Run diagnostics by entering the following command at the
ok>
prompt:
sys-diag
See the Diagnostics Guide for more information.
7 Run the diagnostics that apply to the unit you installed or replaced.
Step Action