NetApp NearStore R100, Hardware And Service Manual

Page: 113 / 164

Chapter 7: Replacing Internal Chassis Components 103
2 Align the DIMM over the slot and then tilt the top edge of the DIMM
at a slight angle away from the top edge of the NVRAM adapter.
3 Insert the DIMM into the slot.
The DIMM should slide into the slot easily if you wiggle the DIMM
into position. If not, realign the DIMM with the slot and try again.
4 Push the DIMM into the slot until the mounting tabs close over the
DIMM to lock it in place.
Caution
Visually inspect the DIMM to verify that it is evenly aligned and
fully inserted into the slot; otherwise, the DIMM could bend or break
when pushed to the locked position.
5 Return to “ Installing an expansion adapter ” on page 101 to complete
the installation.
Step Action