NetApp NearStore R100, Hardware And Service Manual

Page: 112 / 164

102 Installing or replacing expansion adapters
Removing the
NVRAM III DIMM To remove the NVRAM III DIMM, complete the following steps.
Note
This procedure assumes that you already removed the NVRAM III adapter, as
described in “
Removing an existing expansion adapter ” on page 99.
Installing the
NVRAM III DIMM
To install the NVRAM III DIMM, complete the following steps.
Step Action
1 Push apart the latches on both sides of the DIMM with your index
fingers.
2 Place the DIMM in an antistatic bag.
Locator notch
NVRAM card,
top edge
Step Action
1 Hold the DIMM at the top corners to avoid damaging the
components or the edge connector.