NetApp NearStore R100, Hardware And Service Manual

Page: 38 / 164

28 Connecting an R100 disk shelf
Connecting a disk
shelf to the chassis To connect a disk shelf to the chassis, complete the following steps.
Step Action
1 Put on the antistatic wrist strap and grounding leash.
2 Make sure that the chassis and the disk shelves are turned off.
3 Connect each disk shelf to the chassis using the supplied SCSI cables
(SCSI LVD VHDCI-68P), as shown in the following illustration.
94-264VAC, 8A MAX
50-80HZ
94-264VAC, 8A MAX
50-80HZ
EXT 1
EMU
EXT 2 AUX LCD
FAN 1 FAN 2
FAN 3
PS1
10/100
BASE-T
PS2
CAUTION
PROPERLY SHUT DOWN SYSTEM BEFORE OPENING CHASSIS.
OPENING WITH POWER ON WILL CAUSE IMPROPER SHUTDOWN.
MAC 00:A0:98:00:00:01
Console
Diagnostic
SWITCH P/S OFF PRIOR
TO REMOVAL/INSERTION
SWITCH P/S OFF PRIOR
TO REMOVAL/INSERTION
TX
RX
LINK
TX
RX
LINK
FAN 1 FAN 2
FAN 3
Third-party
backup devices
To network
Disk shelf cables
Disk shelf cables
Disk
shelf
power
cords
Chassis
power
cords